FAQ of Connect via TCP to Remote Serial Device

Q:What is the product model?:USR-TCP232-410S(serial to ethernet converter)

Where do you purchase the products?:Online
What's the firmware version?(You can get firmware version from AT command AT+VER or settings webpage):3015
How do you connect and configure the USR device?: Web + setup tool
What's your application? What do you want to realize?: Connect via TCP to remote serial device.
I try to connect using Putty to the remote IP address on port 23 but it does not connect. I've tried changing port and IP address.
  

AMay I have a look at your settings? This is the correct setting:

Sensors -> Serial Port -> TCP232-410S -> Network -> Router -> PC

 

Q:That setup is correct, I've attached a screenshot of the settings page

Sensors -> Serial Port -> TCP232-410S -> Network -> Router -> PC

TCP232 Settings.png

 

Q:add a V-com on your PC using V-VOM.exe,don't quit the software

the v-com work at client mode ,remote IP:192.168.3.113, remote port:23

open TCP232-Test.exe, open the V-COM

then you can send data from sensors to V-COM

For more information, please click FAQ link: http://usriot.com/support/faq/777.html